- Contact Person : Ms. Jie Ellen
- Company Name : Shanghai Lontom Electric Material Co., Ltd.
- Tel : 86-21-63147475
- Fax : 86-21-63144445
- Address : Shanghai,Shanghai,Room 2503, No. 4 Of 1433 Lane, Xizang Rd. (South), Shanghai, China
- Country/Region : China
- Zip : 200011
Related Product Searches:High Temperature Heat Shrink Tube,High Quality,Heat Shrink Tube, Teflon heat shrink tube,PTFE
High temperature Heat Shrinkable Tube1.Telfon shrink tubing2.Excellent chemical properties3.I.D.:0.5~45.0mm4.Transparent
Product Introduction:
Teflon heat shrink tube is primarily for use in high thermal and difficult environmental applications, or where a low coefficient of friction is required. PTFE provides excellent electrical insulation and has excellent chemical and solvent resistance. PTFE has the widest temperature range, best dielectric and corrosion resistant properties of all polyolefin tubings
Main Properties:
1.Operating temperature: -80°C~+260°C
2.Min. full recovery temperature: +327°C
3. Shrink Ratio: 2:1
4.Heat/Corrosion resisting
5. Semi-rigid tubing
6.Standard color: Natural(translucent)
7. Shrinking tool: Heat Gun or Hot air tools
8.Certificate: RoHS , UL
Application:
1.Electronic Components
2.Mechanical Equipments
3.Printing Equipments
4.Petrochemical Equipments
Technical Data:
Properties | Condition | Typical Value |
Specific gravity | ASTM D792 | 2.16g/cm3 |
Tensile strength | ASTM D638 | 24.5MPa |
Elongation at break | ASTM D638 | 350% |
Bending Modulus | ASTM D790 | 490MPa |
Impact Strength | ASTM D256+23°C-54°Cj/m | No crack |
Hardness (shore) | ASTM D2240 | 55 Shore D |
Coefficient of Dynamic Friction | - | 0.1 |
Flammability | UL-224 | VW-1 |
Dielectric Constant (103-106Hz) | ASTM D150 | 2:1 |
Dielectric Dissipation Factor (106Hz) | ASMT D150 | 0.0002 |
Arc Resistance | ASMT D495 | >300s |
Linear Coefficient of Expansion | ASTM D257 | >1018Ω.cm |
Weather Resistance | “Weather-o-meter”(2000h) | No crack |
Solvent resistance | ASTM D543 | Excellent |
chemical resistance | ASTM D543 | Excellent |
Specifications:
Size(mm) | As Supplied (mm) | After Recovered(mm) | Min. Order Quantities (Meters) | |
Original I.D. | Max I.D. | Wall Thickness | ||
Φ0.5 | 0.7±0.2 | ≤0.40 | 0.23 | 500 |
Φ1.0 | 1.0±0.2 | ≤0.50 | 0.23 | 500 |
Φ1.5 | 1.5±0.2 | ≤0.90 | 0.25 | 500 |
Φ2.0 | 2.0±0.2 | ≤1.30 | 0.25 | 500 |
Φ2.5 | 2.5±0.2 | ≤1.50 | 0.30 | 500 |
Φ3.0 | 3.0±0.2 | ≤1.80 | 0.30 | 500 |
Φ3.5 | 3.5±0.2 | ≤2.00 | 0.30 | 500 |
Φ4.0 | 4.0±0.3 | ≤2.50 | 0.30 | 500 |
Φ4.5 | 4.5±0.3 | ≤2.80 | 0.30 | 500 |
Φ5.0 | 5.0±0.3 | ≤3.00 | 0.30 | 500 |
Φ6.0 | 6.0±0.3 | ≤3.80 | 0.38 | 500 |
Φ7.0 | 7.0±0.3 | ≤4.00 | 0.38 | 400 |
Φ8.0 | 8.0±0.3 | ≤4.80 | 0.38 | 400 |
Φ9.0 | 9.0±0.3 | ≤5.00 | 0.38 | 400 |
Φ10.0 | 10.0±0.3 | ≤6.00 | 0.38 | 400 |
Φ12.0 | 12.0±0.3 | ≤7.00 | 0.38 | 400 |
High Temperature Heat Shrink Tube